Controls
Sirens
Sirens
Warning Systems
Warning Systems
.....
IN-PLANT PERSONNEL WARNING SYSTEM
The IPS Warning System is a cost effective delivery system for providing warning communication in all desired areas of you facility. The systems includes a smart microprocessor based controller, tone generation with multiple tones, pre-recorded digital voice messages, live public address and operates on it own battery supply. In the event of an AC power failure, the IPS Warning System will run up to 30 minutes from a fully charged set of batteries.
SPEAKER NODE
STROBENODE
IPS SPEAKERS
| MODEL | DESCRIPTION |
WS15T |
15 watt speaker intended for use in personnel warning applications. The all metal speaker is finished in gray baked epoxy to eliminate corrosion. The speaker incorporates a high efficiency double re-entrant loudspeaker. The WS15T has a swivel mounting base that allows for vertical and horizontal positioning with a single adjustment. The base is easily attached to a number of surfaces such as pillars or I-beams. An internal impedance matching transformer allows the user to select reduced output power levels. |
WS15TR |
15-watt speaker assembly intended for use in personnel warning applications where an interior, flush-mounted ceiling installations required. The speaker incorporates a high efficiency double re-entrant loudspeaker. The all metal speaker is plated to eliminate corrosion. An internal impedance matching transformer allows the user to select reduced output power levels. |
| WS15TEN |
15 watt speaker assembly intended for use in personnel warning applications where an interior, flush-mounted ceiling installations required. The speaker incorporates a high efficiency double re-entrant loudspeaker. The all metal speaker is plated to eliminate corrosion. The WS15TEN comes with round speaker grille, a round recessed enclosure and a mounting ring for 24” ceiling tile. The speaker grille has a fine textured, white painted finish and includes four white mounting screws. An internal impedance matching transformer allows the user to select reduced output power levels. |
| WS30T |
30 watt speaker intended for use in personnel warning applications. The all metal speaker is finished in gray baked epoxy to eliminate corrosion. The speaker incorporates a high efficiency double re-entrant loudspeaker. The WS30T has a swivel mounting base that allows for vertical and horizontal positioning with a single adjustment. The base is easily attached to a number of surfaces such as pillars or I-beams. An internal impedance matching transformer allows the user to select reduced output power levels. |
| WS60T | 60 watt speaker assembly intended for use in indoor personnel warning applications where a high sound level output is required. The speaker flare is made from fiberglass with a spun aluminum re-entrant section. A speaker driver, with wire leads, is assembled to the speaker. The WS60T had a heavy duty, painted steel mounting bracket allows the installer to position the speaker in a number of different ways. An internal impedance matching transformer allows the user to select reduced output power levels. |
WSXPL60T** |
An explosion proof 60 watt speaker assembly intended for use in indoor personnel warning applications where a high sound level output is required. The speaker flare is made from fiberglass with a spun aluminum re-entrant section. A speaker driver, housed in an explosion proof housing, is assembled to the speaker. The speaker assembly has a heavy duty, painted steel mounting bracket allows the installer to position the speaker in a number of different ways. An internal impedance matching transformer allows the user to select reduced power levels. MUST DESIGNATE EXPLOSION PROOF CLASS AND GROUP WHEN ORDERING |
WS100 |
100 watt speaker assembly intended for use in indoor warning applications where high sound level is required. The speaker flare is made from fiberglass with a spun aluminum re-entrant section. A speaker driver, with wire leads, is assembled to the speaker. A heavy duty, painted steel mounting bracket allows the installer to position the speaker in a number of different ways |
WS100TCH |
100 watt speaker assembly intended for use in personnel warning applications where weather-proof or rugged installation is required. The speaker flare is made from fiberglass with a spun aluminum re-entrant section. A cast aluminum housing provides a protective, weather-proof enclosure for he driver and wiring terminals. A heavy duty, painted steel mounting bracket allows the installer to position the speaker in a number of different ways. An internal impedance matching transformer allows the user to select reduced power levels. |
SPEAKERNODE
Each SpeakerNode includes:
NEMA 4 housing with speaker diagnostic,
LED indicators,
status relay and multi-tap transformer for speaker level adjustment.
| MODEL | DESCRIPTION |
| SPKN030 |
0-30 watt node - used for 10-30 watt speakers |
| SPKN100 |
60-100 watt node - used for 60-100 watt speakers |
Each StrobeNode includes:
NEMA 4 Housing with beacket, strobe diagnostics, LED indicators, status relay, plus battery and charger (for 24VDC strobe).
Strobes purchased seperately.
| MODEL | DESCRIPTION |
| STRN1 | Strobe monitor node |